12th Semester 3 GSEB Biology paper solution (Set-13) 19-10-2016

Solution of gujarat board semester 3 Biology exam held on 19-10-2016 is available in following link.

please click to download full solution with reference page number.

12th 3rd sem biology paper solution set-13



Chapter 11

Biotechnology : Principles and Processes

[you can download the notes from the link given at the end of theory]

Biotechnology deals with techniques of using live organisms or enzymes from organisms to produce products and processes useful to humans.

  • Traditional form – based on natural capabilities of microorganisms. making curd, bread or wine, which are all microbe-mediated processes, could also be thought as a form of biotechnology. However, it is used in a restricted sense today,
  • Modern form – it uses genetically modified organisms to achieve the same on a larger scale. Further, many other processes/techniques are also included under biotechnology. For example, in vitro fertilisation leading to a ‘test-tube’ baby, synthesising a gene and using it, developing a DNA vaccine or correcting a defective gene, are all part of biotechnology.
  • The European Federation of Biotechnology (EFB) has given a definition of biotechnology that encompasses both traditional view and modern molecular biotechnology. The definition given by EFB is as follows:

‘The integration of natural science and organisms, cells, parts thereof, and molecular analogues for products and services’.


  • Among many, the two core techniques that enabled birth of modern biotechnology are :
    • Genetic engineering: Techniques to alter the chemistry of genetic material (DNA and RNA),to introduce these into host organisms and thus change the phenotype of the host organism.
    • Maintenance of sterile (microbial contamination-free) ambience in chemical engineering processes to enable growth of only the desired microbe/eukaryotic cell in large quantities for the manufacture of biotechnological products like antibiotics, vaccines, enzymes, etc.
  • Sexual reproduction has many advantages over asexual reproduction. The former provides opportunities for variations and formulation of unique combinations of genetic setup, some of which may be beneficial to the organism as well as the population. Asexual reproduction preserves the genetic information, while sexual reproduction permits variation.
  • Traditional hybridisation procedures used in plant and animal breeding, very often lead to inclusion and multiplication of undesirable genes along with the desired genes. The techniques of genetic engineering which include creation of recombinant DNA, use of gene cloning and gene transfer, overcome this limitation and allow us to isolate and introduce only one or a set of desirable genes without introducing undesirable genes into the target organism.
  • A piece of DNA, which is somehow transferred into an alien organism, most likely would not be able to multiply itself in the progeny cells of the organism. But, when it gets integrated into the genome of the recipient, it may multiply and be inherited along with the host DNA. This is because the alien piece of DNA has become part of a chromosome, which has the ability to replicate.
  • In a chromosome there is a specific DNA sequence called the origin of replication, which is responsible for initiating replication. Therefore, for the multiplication of any alien piece of DNA in an organism it needs to be a part of a chromosome(s) which has a specific sequence known as ‘origin of replication’. Thus, an alien DNA is linked with the origin of replication, so that, this alien piece of DNA can replicate and multiply itself in the host organism. This can also be called as cloning or making multiple identical copies of any template DNA.
  • The construction of the first recombinant DNA emerged from the possibility of linking a gene encoding antibiotic resistance with a native plasmid (autonomously replicating circular extra-chromosomal DNA) of  Salmonella typhimurium.
  • Stanley Cohen and Herbert Boyer accomplished this in 1972 by isolating the antibiotic resistance gene by cutting out a piece of DNA from a plasmid which was responsible for conferring antibiotic resistance.
  • The cutting of DNA at specific locations became possible with the discovery of the so-called ‘molecular scissors’- restriction enzymes.
  • The cut piece of DNA was then linked with the plasmid DNA. These plasmid DNA act as vectors to transfer the piece of DNA attached to it. A plasmid can be used as vector to deliver an alien piece of DNA into the host organism.
  • The linking of antibiotic resistance gene with the plasmid vector became possible with the enzyme DNA ligase, which acts on cut DNA molecules and joins their ends. This makes a new combination of circular autonomously replicating DNA created in vitro and is known as recombinant DNA.
  • When this DNA is transferred into Escherichia coli, a bacterium closely related to Salmonella, it could replicate using the new host’s DNA polymerase enzyme and make multiple copies. The ability to multiply copies of antibiotic resistance gene in coli was called cloning of antibiotic resistance gene in E. coli.
  • there are three basic steps in genetically modifying an organism
    • identification of DNA with desirable genes;
    • introduction of the identified DNA into the host;
    • maintenance of introduced DNA in the host and transfer of the DNA to its progeny.


Key tools of Recombinant DNA technology are – restriction enzymes, polymerase enzymes, ligases, vectors and the host organism.

  1. Restriction Enzymes

  • In 1963, the two enzymes responsible for restricting the growth of bacteriophage in Escherichia coli were isolated. One of these added methyl groups to DNA, while the other cut DNA. The later was called restriction endonuclease.
  • The first restriction endonuclease isolated – Hind II.
  • Restriction endonuclease cut DNA molecules at a particular point by recognising a specific sequence of base pairs. This specific base sequence is known as the recognition sequence.(For Hind II – sequence of 6 base pairs).
  • Today we know more than 900 restriction enzymes that have been isolated from over 230 strains of bacteria each of which recognise different recognition sequences.

Naming of enzymes –

  • First letter of the name comes from the genes
  • The second two letters come from the species of the prokaryotic cell from which they were isolated, e.g., EcoRI comes from Escherichia coli RY 13.
  • Next letter derived from the name of strain.
  • Roman numbers following the names indicate the order in which the enzymes were isolated from that strain of bacteria.

Action of enzyme –

  • Restriction enzymes belong to a larger class of enzymes called nucleases. These are of two kinds; exonucleasesand endonucleases.
  • Exonucleases remove nucleotides from the ends of the DNA whereas, endonucleases make cuts at specific positions within the DNA.
  • Each restriction endonuclease functions by ‘inspecting’ the length of a DNA sequence. Once it finds its specific recognition sequence, it will bind to the DNA and cut each of the two strands of the double helix at specific points in their sugar -phosphate backbones.
  • Each restriction endonuclease recognises a specific palindromic nucleotide sequences in the DNA.
  • The palindrome in DNA is a sequence of base pairs that reads same on the two strands when orientation of reading is kept the same. For example, the following sequences reads the same on the two strands in 5→3 This is also true if read in the 3→5direction.

5—— GAATTC —— 3

3—— CTTAAG —— 5

  • Restriction enzymes cut the strand of DNA a little away from the centre of the palindrome sites, but between the same two bases on the opposite strands. This leaves single stranded portions at the ends. There are overhanging stretches called sticky ends on each strand.
  • These are named so because they form hydrogen bonds with their complementary cut counterparts. This stickiness of the ends facilitates the action of the enzyme DNA ligase.
  • Restriction endonucleases are used in genetic engineering to form ‘recombinant’ molecules of DNA, which are composed of DNA from different sources/genomes.
  • When cut by the same restriction enzyme, the resultant DNA fragments have the same kind of ‘sticky-ends’ and, these can be joined together (end-to-end) using DNA ligases .
  • Normally, unless one cuts the vector and the source DNA with the same restriction enzyme, the recombinant vector molecule cannot be created.


Fig: Steps in formation of recombinant DNA by action of restriction endonuclease enzyme – EcoRI


Fig: Diagrammatic representation of recombinant DNA technology


Separation and isolation of DNA fragments :

  • The cutting of DNA by restriction endonucleases results in the fragmentes of DNA. These fragments can be separated by a technique known as gel electrophoresis.
  • Since DNA fragments are negatively charged molecules they can be separated by forcing them to move towards the anode under an electric field through a medium/matrix. Nowadays the most commonly used matrix is agarose which is a natural polymer extracted from sea weeds.
  • The DNA fragments separate (resolve) according to their size through sieving effect provided by the agarose gel. Hence, the smaller the fragment size, the farther it moves.
  • The separated DNA fragments can be visualised only after staining the DNA with a compound known as ethidium bromide followed by exposure to UV radiation.
  • We can see bright orange coloured bands of DNA in aethidium bromide stained gel exposed to UV light.
  • The separated bands of DNA are cut out from the agarose gel and extracted from the gel piece. This step is known as elution. The DNA fragments purified in this way are used in constructing recombinant DNA by joining them with cloning vectors.


Fig: A typical agarose gel electrophoresis showing migration of undigested (lane 1) and digested set of DNA fragments (lane 2 to 4)
  1. Cloning Vectors

  • Plasmids and bacteriophages have the ability to replicate within bacterial cells independent of the control of chromosomal DNA.
  • Bacteriophages because of their high number per cell, have very high copy numbers of their genome within the bacterial cells.
  • If we are able to link an alien piece of DNA with bacteriophage or plasmid DNA, we can multiply its numbers equal to the copy number of the plasmid or bacteriophage.
  • Vectors used at present, are engineered in such way that they help easy linking of foreign DNA and selection of recombinants from non-recombinants.

Features required to facilitate cloning into a vector.

Origin of replication (ori):

  • This is a sequence from where replication starts and any piece of DNA when linked to this sequence can be made to replicate within the host cells.
  • This sequence is also responsible for controlling the copy number of the linked DNA.
  • So, if one wants to recover many copies of the target DNA it should be cloned in a vector whose origin support high copy number.

    Selectable marker :

  • In addition to ‘ori’, the vector requires a selectable marker, which helps in identifying and eliminating nontransformants and selectively permitting the growth of the transformants.
  • Transformation is a procedure through which a piece of DNA is introduced in a host bacterium.
  • Normally, the genes encoding resistance to antibiotics such as ampicillin, chloramphenicol, tetracycline or kanamycin, etc., are considered useful selectable markers for coli. The normal E. coli cells do not carry resistance against any of these antibiotics.

    Cloning sites:

  • In order to link the alien DNA, the vector needs to have very few, preferably single, recognition sites for the commonly used restriction enzymes.
  • Presence of more than one recognition sites within the vector will generate several fragments, which will complicate the gene cloning.
  • The ligation of alien DNA is carried out at a restriction site present in one of the two antibiotic resistance
  • For example, you can ligate a foreign DNA at the Bam H I site of tetracycline resistance gene in the vector pBR322. The recombinant plasmids will lose tetracycline resistance due to insertion of foreign DNA but can still be selected out from non-recombinant ones by plating the transformants on ampicillin containing medium. The transformants growing on ampicillin containing medium are then transferred on a medium containing tetracycline. The recombinants will grow in ampicillin containing medium but not on that containing tetracycline. But, nonrecombinants will grow on the medium containing both the antibiotics. In this case, one antibiotic resistance gene helps in selecting the transformants, whereas the other antibiotic resistance gene gets ‘inactivated due to insertion’ of alien DNA, and helps in selection of recombinants.
  • Selection of recombinants due to inactivation of antibiotics is a cumbersome procedure because it requires simultaneous plating on two plates having different antibiotics. Therefore, alternative selectable markers have been developed which differentiate recombinants from non-recombinants on the basis of their ability to produce colour in the presence of a chromogenic substrate.
  • In this, a recombinant DNA is inserted within the coding sequence of an enzyme, a-galactosidase. This results into inactivation of the enzyme, which is referred to as insertional inactivation. The presence of a chromogenic substrate gives blue coloured colonies if the plasmid in the bacteria does not have an insert. Presence of insert results into insertional inactivation of the a-galactosidase and the colonies do not produce any colour, these are identified as recombinant colonies.

    Vectors for cloning genes in plants and animals :

  • Viruses and bacteria are used to transfer genes into plants and animals which transform eukaryotic cells and force them to do what the bacteria or viruses want.
  • For example, Agrobacterioumtumifaciens, a pathogen of several dicot plants is able to deliver a piece of DNA known as ‘T-DNA’ to transform normal plant cells into a tumor and direct these tumor cells to produce the chemicals required by the pathogen.
  • Similarly, retroviruses in animals have the ability to transform normal cells into cancerous
  • A better understanding of the art of delivering genes by pathogens in their eukaryotic hosts has generated knowledge to transform these tools of pathogens into useful vectors for delivering genes of interest to humans.
  • The tumor inducing (Ti) plasmid of Agrobacterium tumifacienshas now been modified into a cloning vector which is no more pathogenic to the plants but is still able to use the mechanisms to deliver genes of our interest into a variety of plants. Similarly, retroviruses have also been disarmed and are now used to deliver desirable genes into animal cells. So, once a gene or a DNA fragment has been ligated into a suitable vector it is transferred into a bacterial, plant or animal host (where it multiplies).
Fig: E. coli cloning vector pBR322 showing restriction sites (Hind III, EcoR I, BamH I, Sal I, PvuII, PstI, ClaI), ori and antibiotic resistance genes (ampR and tetR). Rop codes for the proteins involved in the replication of the plasmid.
  1. Competent Host (For Transformation with Recombinant DNA)

  • Since DNA is a hydrophilic molecule, it cannot pass through cell membranes. In order to force bacteria to take up the plasmid, the bacterial cells must first be made ‘competent’ to take up DNA.
  • This is done by treating them with a specific concentration of a divalent cation, such as calcium, which increases the efficiency with which DNA enters the bacterium through pores in its cell wall.
  • Recombinant DNA can then be forced into such cells by incubating the cells with recombinant DNA on ice, followed by placing them briefly at 420oC (heat shock), and then putting them back on ice. This enables the bacteria to take up the recombinant DNA.
  • In micro-injection method, recombinant DNA is directly injected into the nucleus of an animal cell.
  • In another method, suitable for plants, cells are bombarded with high velocity micro-particles of gold or tungsten coated with DNA in a method known as biolisticsor gene gun.
  • And the last method uses ‘disarmed pathogen’ vectors, which when allowed to infect the cell, transfer the recombinant DNA into the host.


Recombinant DNA technology involves several steps in specific sequence such as –

  • isolation of DNA,
  • fragmentation of DNA by restriction endonucleases,
  • isolation of a desired DNA fragment,
  • ligation of the DNA fragment into a vector,
  • transferring the recombinant DNA into the host,
  • culturing the host cells in a medium at large scale and
  • extraction of the desired product.
  1. Isolation of the Genetic Material (DNA)

  • Nucleic acid is the genetic material of all organisms without exception. In majority of organisms this is deoxyribonucleic acid or DNA.
  • In order to cut the DNA with restriction enzymes, it needs to be in pure form, free from other macro-molecules. Since the DNA is enclosed within the membranes, we have to break the cell open to release DNA along with other macromolecules such as RNA, proteins, polysaccharides and also lipids. This can be achieved by treating the bacterial cells/plant or animal tissue with enzymes such as lysozyme (bacteria), cellulase(plant cells), chitinase(fungus).
  • genes are located on long molecules of DNA interwined with proteins such as histones.
  • RNA can be removed by treatment with ribonuclease whereas proteins can be removed by treatment with protease. Other molecules can be removed by appropriate treatments and purified DNA ultimately precipitates out after the addition of chilled ethanol. This can be seen as collection of fine threads in the suspension.


Fig: DNA thatseparates out can beremoved by spooling
  1. Cutting of DNA at Specific Locations

  • Restriction enzyme digestions are performed by incubating purified DNA molecules with the restriction enzyme, at the optimal conditions for that specific enzyme.
  • Agarose gel electrophoresis is employed to check the progression of a restriction enzyme digestion. DNA is a negatively charged molecule, hence it moves towards the positive electrode (anode).
  • The process is repeated with the vector DNA also.
  • The joining of DNA involves several processes. After having cut the source DNA as well as the vector DNA with a specific restriction enzyme, the cut out ‘gene of interest’ from the source DNA and the cut vector with space are mixed and ligase is added. This results in the preparation of recombinant DNA.
  1. Amplification of Gene of Interest using PCR (Polymerase Chain Reaction)

  • In this reaction, multiple copies of the gene (or DNA) of interest is synthesisedin vitro using two sets of primers (small chemically synthesised oligonucleotides that are complementary to the regions of DNA) and the enzyme DNA polymerase.
  • The enzyme extends the primers using the nucleotides provided in the reaction and the genomic DNA as template.
  • If the process of replication of DNA is repeated many times, the segment of DNA can be amplified to approximately billion times.
  • Such repeated amplification is achieved by the use of a thermostable DNA polymerase (isolated from a bacterium, Thermusaquaticus), which remain active during the high temperature induced denaturation of double stranded DNA.
  • The amplified fragment if desired can now be used to ligate with a vector for further cloning.


Fig: Polymerase chain reaction (PCR) : Each cycle has three steps: (i) Denaturation;

(ii) Primer annealing; and (iii) Extension of primers

  1. Insertion of Recombinant DNA into the Host Cell/Organism

  • There are several methods of introducing the ligated DNA into recipient cells. Recipient cells after making them ‘competent’ to receive, take up DNA present in its surrounding.
  • So, if a recombinant DNA bearing gene for resistance to an antibiotic (e.g., ampicillin) is transferred into coli cells, the host cells become transformed into ampicillin-resistant cells. If we spread the transformed cells on agar plates containing ampicillin, only transformants will grow, untransformed recipient cells will die. Since, due to ampicillin resistance gene, one is able to select a transformed cell in the presence of ampicillin. The ampicillin resistance gene in this case is called a selectable marker.
  1. Obtaining the Foreign Gene Product

  • When you insert a piece of alien DNA into a cloning vector and transfer it into a bacterial, plant or animal cell, the alien DNA gets multiplied.
  • In almost all recominant technologies, the ultimate aim is to produce a desirable protein. Hence, there is a need for the recombinant DNA to be expressed.
  • The foreign gene gets expressed under appropriate conditions. The expression of foreign genes in host cells involve understanding many technical details.
  • After having cloned the gene of interest and having optimised the conditions to induce the expression of the target protein, one has to consider producing it on a large scale.
  • If any protein encoding gene is expressed in a heterologous host, is called a recombinant protein.
  • The cells harbouring cloned genes of interest may be grown on a small scale in the laboratory. The cultures may be used for extracting the desired protein and then purifying it by using different separation techniques.
  • The cells can also be multiplied in a continuous culture system wherein the used medium is drained out from one side while fresh medium is added from the other to maintain the cells in their physiologically most active log/exponential phase. This type of culturing method produces a larger biomass leading to higher yields of desired protein.
  • Small volume cultures cannot yield appreciable quantities of products. To produce in large quantities, the development of bioreactors, where large volumes (100-1000 litres) of culture can be processed, was required. Thus, bioreactors can be thought of as vessels in which raw materials are biologically converted into specific products, individual enzymes, etc., using microbial plant, animal or human cells. A bioreactor provides the optimal conditions for achieving the desired product by providing optimum growth conditions (temperature, pH, substrate, salts, vitamins, oxygen).
  • A stirred-tank reactor is usually cylindrical or with a curved base to facilitate the mixing of the reactor contents. The stirrer facilitates even mixing and oxygen availability throughout the bioreactor. Alternatively air can be bubbled through the reactor.
  • The bioreactor has an agitator system, an oxygen delivery system and a foam control system, a temperature control system, pH control system and sampling ports so that small volumes of the culture can be withdrawn periodically.


Fig: (a) Simple stirred-tank bioreactor; (b) Sparged stirred-tank bioreactor through whichsterile air bubbles are sparged


  1. Downstream Processing
  • After completion of the biosynthetic stage, the product has to be subjected through a series of processes before it is ready for marketing as a finished The processes include separation and purification, which are collectively referred to as downstream processing.
  • The product has to be formulated with suitable preservatives. Such formulation has to undergo thorough clinical trials as in case of drugs. Strict quality control testing for each product is also required. The downstream processing and quality control testing vary from product to product.

To download notes in pdf format please click on the following link.

principles and processes in biotechnology